研究論文(一般） Technical Papers
| 番号 | 題目 | 掲載誌 巻･号・頁 | 発表年月 | 著者名 |
| 1 | アクリロおよびメタクリログアナミンと不飽和カルボン酸の共重合と共重合体の性質 | 日本化学学会誌.，6，1013-1020 | 1981 | 瀬尾敏弘、金井俊孝加倉井敏夫 |
| 2 | Kinematics，Dynamics and Stability of the Tubular Film Extrusion of Various Polyethylenes | Polym.Eng.Sci., 24, 1185－1201 |
1984 | T.Kanai, J.L.White |
| 3 | ｲﾝﾌﾚｰｼｮﾝ成形における動力学的研究（Ⅰ） 結晶性ポリマーの解析 |
繊維学会誌，40，T-465－T-479 |
1984 |
金井俊孝，冨川昌美 J ．L．White，清水二郎 |
| 4 | 高分子の加工性予測における問題点 |
日本レオロジー学会誌 ., 12, 207－211 |
1984 |
鈴木俊一 , 金井俊孝 |
| 5 | ｲﾝﾌﾚｰｼｮﾝ成形における動力学的研究（Ⅱ） 非晶性ポリマーの解析 |
繊維学会誌， 41，T-271－T-281 |
1985 |
金井俊孝 ,木村正克，清水二郎 |
| 6 | Dynamics, Heat Transfer and Structure Development in TubularFilm Extrusion of Polymer Melts: A Mathematical Model and Prediction |
J ．Polym．Eng．，5，(2),135－157 |
1985 |
T.Kanai, J.L.White |
| 7 | ｲﾝﾌﾚｰｼｮﾝ成形におけるｽｹｰﾙｱｯﾌﾟに関する研究 （Ⅰ）成形条件とフィルム物性の相関 |
繊維学会誌 , 41，T-139 |
1985 |
金井俊孝 ,清水二郎 |
| 8 |
ｲﾝﾌﾚｰｼｮﾝ成形におけるｽｹｰﾙｱｯﾌﾟに関する研究 （Ⅱ）ｽｹｰﾙｱｯﾌﾟの考え方 |
繊維学会誌， 41，T-179－T-188 | 1985 |
金井俊孝 ,清水二郎 |
| 9 | T ダイキャスト成形の理論解析 | 繊維学会誌， 41，T-409－ T-417 | 1985 | 金井俊孝 |
| 10 | T ダイキャスト成形の実験解析 | 繊維学会誌， 41，T-521－ T-529 | 1985 |
金井俊孝, 船木章 |
| 11 | T ダイキャスト成形の成形性に関する研究 | 繊維学会誌， 42， T-1－T-10 | 1986 |
金井俊孝, 船木章 |
| 12 | フラットダイの実験解析およびスケールアップ則 | 繊維学会誌， 41，T-203 －T-214 | 1986 |
船木章, 金井俊 孝 |
| 13 | Studies on Scale －up of Tubular film Extrusion， | J ．Plastic．Film and sheeting，2，224－241 | 1986 |
T .Kanai, |
| 14 | Theoretical Analysis of Tubular film Extrusion and its Applications for HMW －HDPE |
Int ．Polym．Process 1(3) ，137－143 |
1987 | T .Kanai |
| 15 | Prediction of Birefringence for Polycarbonate Optical Memory Disk |
Int ．Polym.Process 4(3) ，132－142 |
1989 |
T.Kanai, K.Shimizu, Y.Uryu: |
| 16 | Dynamics of Double Bubble Tubular Film Process for Producing Biaxially Oriented Nylon 6 Film |
Int.Polym.Process 5(4) ，287－291 |
1990 | M.Takashige ，T.Kanai |
| 17 | ＰＣ光磁気ディスク基板の成形技術 |
日本塑性加工学会32 ，（371），1492－1496 |
1991 |
柴田康雅、金井俊孝 、小島光太郎 |
| 18 |
Development of High Performance 86mm MO Disk by using polycarbonate substrate |
Optical Data Strage Technical Digest Series15,218-222 |
1991 |
K.Ito, Y.Shibata M.Tsukahara T.Kanai ,K.Shimizu |
| 19 | 発泡成形における気泡成長の粘弾性的解析 平成１５年度プラスチック成形加工学会論文賞受賞 |
成形加工 15(9),638-645 | 2003 |
大槻安彦、金井俊孝 、瀧健太郎、大嶋正裕 |
| 20 | Scale-up Rule for Double Bubble Tubular Film Production Process of PA6 Nylon6 Film | Int.Polym.Process18(4), 368-375 |
2003 | M.Takashige , T.Kanai ,T.Yamada |
| 21 | Deformation Behavior, Processability, and Physical Properties for Biaxially Oriented Film of Linear Low Density Polyethylene | Int.Polym.Process 19(2), 155-162（2004） | 2004 | H.Uehara,K.Sakauchi , T.Kanai, , T.Yamada |
| 22 | Strectability and Properties of Linear Low Density Polyethylene Blends for Biaxially Oriented Film | Int.Polym.Process 19(2), 163-171（2004） | 2004 | H.Uehara,K.Sakauchi , T.Kanai, , T.Yamada |
| 23 |
Stretchability and Properties of LLDPE Biaxially Oriented Film |
Int.Polym.Process 19(2),172-179(2004) | 2004 | H.Uehara,K.Sakauchi , T.Kanai, , T.Yamada |
| 24 |
Stretchability and Properties of Various LLDPE for Biaxially Oriented Film |
Int.Polym.Process 21(5),449-456 | 2006 | H.Uehara,K.Sakauchi , T.Kanai, , T.Yamada |
| 25 | Thichness Uniformity of Double Bubble Tubular Film Process for Producing Biaxilly Oriented PA6 Film | Int.Polym.Process 19(1),47-55 | 2004 | M.Takashige , T.Kanai T.Yamada |
| 26 | Bowing Phenomenon in Double Bubble Tubular Film Process for PA6 Film | Int.Polym.Process 19(1),56-63 | 2004 | M.Takashige ,T.Kanai,T.Yamada |
| 27 | Easy Tear Film of Biaxially Oriented Nylon6／MXD6 Blend by Double Bubble Tubular Film Process | Int.Polym.Process 19(2),147-154(2004) | 2004 | M.Takashige ,T.Kanai,T.Yamada |
| 28 | Thermal decomposition behavior and flameretardancyofpolycarbonate containing organic metal salts: Effects of salt composition |
J.Appl.Polym.Sci.,94,(5),2131-2139 |
2004 | A.Nodera, T.Kanai |
| 29 | Easy Tear Multilayer Film of Biaxially Oriented PA6/MXD6 by Double Bubble Tubular Film Process | Int.Polym.Process 20(1),100-105 | 2005 |
M.Takashige ,T.Kanai |
| 30 |
Numerical Simulation of Bubble Growthin Viscoelastic Fluid with Diffusion of Dissolved Foaming Agnet |
Polym.Eng.Sci.,45(9),1277-1287 |
2005 |
Y.Otsuki, T.Kanai |
| 31 | Flame Retardancy of Polycarbonate-Polydimethylsiloxane Block Copolymer : Effect of Dimethylsiloxane Block Size | J.Appl.Polym.Sci., 100, p.565-575 |
2006 | A.Nodera,T.Kanai |
| 32 |
マイクロセルラー発泡成形におけるセル形態の影響因子の把握 |
成形加工,18,(7)510-516 | 2006 |
寺本弦正、阿江晴彦、金井俊孝 |
| 33 | Multilayer Barrier Film of Biaxially Oriented PA6/EVOH by Double Bubble Tubular Film Process | Int.Polym.Process 21(1)86-92 |
2006 | M.Takashige ,T.Kanai |
| 34 |
Relationship between Thermal Degradation Behavior and Flame Retardancy on Polycarbonate Polydimethylsiloxane Block Copolymer |
J.Appl.Polym.Sci.102,1697-1705 | 2006 |
A.Nodera, T.Kanai |
| 35 | Flame Retardancy of Polycarbonate-Polydimethylsiloxane Block Copolymer / Silica Nanocomposites | J.Appl.Polym.Sci.,101,3862-3868 | 2006 | A.Nodera, T.Kan ai |
| 36 | Stretchability and Properties of Biaxially Oriented Polypropylene Film | Int.Polym.Process 21(5)449-456 | 2006 | T.Kanai , H.Uehara, K.Sakauchi, T.Yamada |
| 37 | Quantitative Analysis for Polymer Degradation in the Extrusion Process | Int.Polym.Process 21(1)24-31 |
2006 | H.Kometani,T.Matsumura, T.Suga,T.Kanai |
| 38 | Visualization and Theoretical Analysis for Instabilities of Viscoelastic Flow | Int.Polym.Process 21(1)32-39 |
2006 | H.Kometani, H.Kitajima, T.Matsumura, T.Suga, T.Kanai |
| 39 | 粘弾性流体の不安定流動に関する可視化および理論解析 | 成形加工,19,(2)883-890 | 2007 | 米谷秀雄,北嶋英俊、松村卓美、菅貴紀、金井俊孝 |
| 40 | Experimental and Theoretical Analysis for Film Casting of Viscoelastic Fluid | J.Polym.Eng.27(1)、1-28 | 2007 | H.Kometani, T.Matsumura, T.Suga, T.Kanai |
| 41 | Morphological Analysis of the Tiger-Stripe on Injection Molding of Polypropylene/Ethylene-Propylene Rubber/Talc Blends Dependent on Based Polypropylene Design | J.Appl.Polym.Sci.104,192-199 | 2007 |
K.Hirano, Y.Suetsugu,T.Kanai |
| 42 | A new bleeding model of additives in a polypropylenn film under atmospheric pressure | J.Appl.Polym.Sci、104,3751-3757. | 2007 | M.Wakabayashi,T.Kohno,T.Kimura,S.Tamura, M.Endoh,S.Ohnishi,T.Nishioka,T.Tanaka,T.Kanai |
| 43 | シリコーン共重合PCによるPCアロイ難燃化技術 | 成形加工19（3）187-193 | 2007 | 野寺明夫、早田祐介、金井俊孝 |
| 44 | Striped-Pattern Deterioration and Morphological
Analysis on Injection Molding comprising Polypropylen/Ethylene-α
olefin Rubber Blends (1) Influence of Ultraviolet Irradiation |
J.Appl.Polym. Sci.,105,2416-2426） | 2007 | Koki Hirano, Satoshi Tamura, Toshitaka Kanai |
| 45 | Influence of the cooling water temperature on film stretchability and superstructure in double bubble tubular process of random polypropylene | J.Polym.Eng.27(6)447-488 | 2007 | K.Sakauchi, H.Uehara, T.Yamada, Y.Obata, T.Takebe, T.Kanai |
| 46 | A new bleeding model of additives in a polypropylene film under atmospheric pressure Ⅱ | J.Appl.Polym. Sci106,1398-1404 | 2007 | M.Wakabayashi,T.Kohno,T.Kimura,S.Tamura, M.Endoh,S.Ohnishi,T.Nishioka,T.Tanaka,T.Kanai |
| 47 | Influence of cooling water temperature on film stretchability and physical properties of LLDP Film density polyethylene in the double bubble tubular film process | J.Polym.Eng.28(4)243-272 | 2008 | K.Sakauchi, H.Uehara, T.Yamada, Y.Obata, T.Takebe, T.Kanai |
| 48 | Biaxially Oriented Shrinkage PA6 Film | J.Polym.Eng,28(3)179-201 | 2008 | M.Takashige ,T.Kanai |
| 49 | Physical Properties of Biaxaially Oriented PA6 Film for Simultaneous Stretching and Sequential One | Int.Polym.Process | accepted | M.Takashige ,T.Kanai |
| 50 | Striped-Pattern Deterioration and Morphological Analysis on Injection Molding comprising Polypropylen/Ethylene-α olefin Rubber Blends (2) Influence of heating | J.Appl.Polym. Sci.108(1)76-84 | 2008 | Koki Hirano, Satoshi Tamura,Yutaka Obata,Toshitaka Kanai |
| 51 | エチレン共重合ランダムポリプロピレン製チューブラー二軸延伸フィルムの熱処理による収縮挙動 | 成形加工21(6)337-345 | 2009 | 阪内邦夫,武部智明,上原英幹,山田敏郎、金井俊孝 |
| 52 |
ポリプロピレンの高速溶融紡糸における低立体規則性成分ブレンドの効果 | 成形加工,20(11)831-839 | 2008 | 郡洋平,宝田亘,伊藤浩志,武部智明,南裕,金井俊孝,鞠谷雄士 |
| 53 | Study on the Bleeding Mechanism of Slip Agents in a Polypropylene Film using Molecular Dynamics | Intern.Polymer Processing 24(2),133- 139 | 2009 | M.Wakabayashi, T.Kohno, T.Tanaka, T.Kanai |
| 54 | Experimental Analysis for Extrusion Screw Geometry toProduce Highly Transparent Polypropylene Sheets | POLYMER ENGINEERING AND SCIENCE,420-427 | 2010 | Akira Funaki, Toyokazu Takubo, Toshitaka Kanai |
| 55 | Relating Microhardness to Injection Molding Induced Morphology: A Study of Microbeam Synchrotron WAXD | Journal ofAppliedPolymer Science,Vol. 116, 1823-1831 | 2010 | Yutaka Kobayashi, Hiroaki Kanno, Yasuhiro Hanamoto, Makoto Ando, Toshitaka Kanai |
| 56 | 射出成形サイクル短縮に伴うPP の表面特性の変化 | 成形加工, Vol. 22.（2） 97-103 | 2010 | 小林豊、金井俊孝 |
| 57 | Microscopic Mechanical Properties and Injection Molding-Induced Morphology on Polypropylene Rubber Blend | Journal ofAppliedPolymer Science,Vol. 116, 2590-2600 | 2010 | Yutaka Kobayashi,Makoto Ando,Toshitaka Kanai |
| 58 | Viscoelastic Flow Analysis of Surface Morphology onInjection-Molded Polypropylene | Polym.Eng.&Sci. p2182-2189 (2010) | 2010 | Yutaka Kobayashi, Yasuhiko Otsuki, Toshitaka Kanai |
| 59 | Analysis of Contributing Factors to Production of Highly Transparent Isotactic Polypropylene Extrusion Sheets. Part I | Polym.Eng.Sci. P2356-2365(2010) |
2010 | Akira Funaki,1 Toshitaka Kanai,2 Yuta Saito,3 Toshiro Yamada |
| 60 | Relating Scratch Resistance to Injection Molding-Induced Morphology of Polypropylene |
Journal of Applied Polymer Science P.141-147 |
2010 | Yutaka Kobayashi, Yasuhiko Otsuki, Hiroaki Kanno, Yasuhiro Hanamoto,Toshitaka Kanai |
| 61 | The Unique Flow of Polypropylene at the Weld Line Behind an Obstacle in Injection Molding | Polym.Eng.Sci. P.526-531(2011) |
2011 | Yutaka Kobayashi, Gensei Teramoto, Toshitaka Kanai |
| 62 | Physical properties of biaxially oriented PA6 fi lm forsimultaneous stretching and sequential processing | J.Polym. Eng., | 2011 | M.Takashige ,T.Kanai |
| 63 | ポリプロピレンシートの透明性に対する多層押出しの効果 | 成形加工, Vol. 23.（5）229-235 | 2011 | 船木章,蔵谷祥太,山田敏郎,金井俊孝 |
| 64 | Crystallization of Polypropylene Near the Surface inInjection-Molded
Plaques: A Comparison of Morphology and a Numerical Analysis |
Polym.Eng.Sci. P1236-1244(2011) |
2011 | Yutaka Kobayashi, Yasuhiko Otsuki, Hiroaki Kanno, Tomoyoshi Sasakawa,Yasuhiro Hanamoto, Toshitaka Kanai |
| 65 | Study of Crater Structure Formation on the Surface of Biaxially Oriented Polypropylene Film |
Journal of Applied Polymer Science, | 2012 | Satoshi Tamura, Katsutoshi Ohta, Toshitaka Kanai |
| 66 | The Effect of Molecular Structure of Polypropylene on Stretchability for Biaxially Oriented Film |
Polym.Eng.Sci. P1383-1393 |
2012 | Satoshi Tamura,Itaru Kuramoto,Toshitaka Kanai |
| 67 | Crater Formation Mechanism on the Surface of a Biaxially Oriented Polypropylene Film | J. Appl. Polym. Sci., 126, 50 | 2012 | Satoshi Tamura, Koichi Takino, Toshiro Yamada, Toshitaka Kanai |
| 68 |
Control of Well-Defined Crater Structures on the Surface of Biaxially Oriented Polypropylene Film by Adding Nucleators |
J. Appl. Polym. Sci., 3555(2013) |
2013 | Satoshi Tamura, Toshitaka Kanai |
| 69 | Structure and Properties of Low-Isotacticity Polypropylene Elastomeric Fibers Prepared by Sheath-Core Bicomponent Spinning- Effect of the Composition of Sheath Layer with Constant High-Isotacticity Polypropylene Content - | SEN’I GAKKAISHI; Vol.70, No. 9 197-206 | 2014 | Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai,Wataru Takarada, Takeshi Kikutani |
| 70 | Structure and properties of low-isotacticity polypropylene elastomeric fibers prepared by sheath-core bicomponent spinning: effect of localization of high-isotacticity component near the fiber surface | J Polym Eng;35,No.3, 277-285 | 2015 | Youhei Kohri , Tomoaki Takebe , Yutaka Minami , Toshitaka Kanai ,
Wataru Takarada ,Takeshi Kikutani |
| 71 |
Theoretical anaysis of spunbond process | AIP Journal, 1-7 | 2016 | Toshitaka Kanai,Youhei Kohri , Tomoaki Takebe |
| 72 | Mutual Interaction between High and Low Stereo-regularity Components for Crystallization and Melting Behaviors of Polypropylene Blend Fibers | AIP Journal 80002-1 -80002-4 | 2016 | Kouya Kawai, Youhei Kohri, Wataru Takarada, Tomoaki Takebe, Toshitaka Kanai, Takeshi Kikutani |
| 73 | Theoretical Analysis of the Spunbond Process and its Applications for Polypropylenes | Advances in Polymer Technology 17, Jul 2017, | 2017 | Toshitaka Kanai, Youhei Kohri, Tomoaki Takebe |
| 74 | The Evaluation of Stretchability and its Applications for Biaxially Oriented Polypropylene Film | Advances in Polymer Technology 17, Sep, 2017 | 2017 | Toshitaka Kanai, Kentaro Egoshi, Satoshi Ohno, Tomoaki Takebe |
| 75 | Development of a biaxial stretching test | J. Polym. Eng; | 2018 | K.Egoshi,, T. Kanai,K.Tamura |
| 76 | In-situ Measurement of Stress, Retardation and Three Dimensional Refractive Indexes during Biaxial Stretching Experiments under Various Preheating Times | J. Polym. Eng; | 2018 | K.Egoshi,, T. Kanai,K.Tamura |
| 77 | Dynamics and structure development for biaxial stretchingpolyamide 6 films | Advances in Polymer Technology | 2018 | T.Kanai,Y.Okuyama,M.Takashige |
| 78 | Dynamics and structure development for biaxial stretchingPA6/MXD6 blend packaging film | Advances in Polymer Technology | 2018 | T.Kanai,Y.Okuyama,M.Takashige |